Mapei fully bonded membranes for waterproofing basements, foundations and other underground structures. Pre-applied membranes are laid before the concrete is poured and bond to it as it cures; post-applied self-adhesive membranes go onto the concrete afterwards. Because the membrane is bonded to the structure, water cannot travel between the two, so any damage stays local.
Mapeproof AL AP+
Pre-applied, fully bonded HDPE membrane with SealLap selvedge. Laid under the foundations before the pour, so the concrete bonds directly to it: no lateral water migration, and a barrier against radon.
Mapeproof FBT
Synthetic fully bonded waterproofing membrane laminated with non-woven fabric, for waterproofing underground structures.
Mapeproof FBH
HDPE membrane sandwiched to a non-woven fabric backing, pre-applied so the concrete bonds fully to it, for underground structures.
Post-applied self-adhesive membranes (after the pour)
Mapeproof AL 1200 AP
Self-adhesive HDPE membrane for waterproofing underground walls and structures after the concrete has been poured, forming a monolithic bond with the substrate.
Mapeproof SA
Self-adhesive HDPE membrane for waterproofing underground structures, bonding fully to the concrete.
Mapeproof FBA 1200
Self-adhesive FPO membrane for fully bonded waterproofing of underground structures, applied after the concrete is poured.
Mapethene HT AP
Self-adhesive bitumen membrane, usable at high temperatures up to +35 °C, for waterproofing underground structures and roofs.
Mapethene LT AP
Self-adhesive bitumen membrane for application at low temperatures down to +5 °C, for underground structures and roofs.
Bentonite membranes
Mapeproof P5
Waterproofing bentonite sheet for horizontal and vertical surfaces of underground structures; the natural sodium bentonite swells on contact with water to seal.
Primers
Mapeproof SA Primer
One-component, rapid-drying primer for treating concrete surfaces before applying self-adhesive Mapeproof membranes.
Mapethene Primer
Solvent-free, water-based bitumen primer for the self-adhesive membranes of the Mapethene line.
Tapes, joints & detailing
Mapeproof FBT Tape 600
Adhesive tape with a non-woven fabric face, used to join the upper sides of adjacent Mapeproof FBT sheets.
Mapeproof AL Tape D10 AP
Double-sided adhesive tape for jointing, sealing and strengthening the Mapeproof AL AP system.
Idrostop Soft
Hydro-expansive, highly flexible bentonite profile for waterproofing construction joints and second pours of concrete.
Mapeplan Waterstop
PVC waterstop for sealing structural, expansion and construction joints in concrete (Polyglass).
Mapeproof Swell
Hydro-expansive, rubber-based sealant paste in cartridges, for sealing joints and penetrations.
Mapeproof Mastic
Natural sodium bentonite paste for sealing pipes and other elements that pass through the waterproofing.
Mapeproof Liquid Membrane
Two-component polyurethane liquid membrane for sealing and detailing around Mapeproof and Mapethene membranes.